The HP 2920-48 PoE Gigabit Switch 740W (J9836A) is a supported device in the MiCloud and Sky phone systems.
NOTE: As of October 23, 2019, the HP 2920-48 PoE Gigabit Switch 740W (J9836A) is no longer available as a new rental device from RingCentral. Per Hewlett Packard, this switch has reached End of Sale. Existing customers who continue to rent this device will receive support as per their rental contract. The HP 2920-48 PoE Gigabit Switch is replaced by the following:
The HP 2920-48 PoE Gigabit Switch provides security, scalability and ease of use for enterprise edge, SMB, and branch office access layer deployments. A powerful Hewlett Packard Networking ASIC delivers low latency, more packet buffering, and adaptive power consumption to this robust Basic Layer 3 switch that supports modular stacking, 10GbE, RIP routing, PoE+, ACLs, sFlow and IPv6. The HP 2920 Switch Series can be managed with the optional HP Intelligent Management Center (IMC) software for a single view of your entire network and is ready for the Software-defined Network (SDN) with OpenFlow support.
Summary of features for the HP 2920–48 PoE Gigabit Switch 740W (J9836A):
- 48-port basic L3 10/100/1000 PoE+ switch with 2 slots for optional 10G modules, 1 slot for optional stacking module and a modular power supply supporting 740W of PoE+ Power.
- Supports 44 RJ-45 autosensing 10/100/1000 PoE+ ports plus 4 RJ-45 dual-personality 10/100/1000 PoE+ ports, and 2 module slots.
- Memory/processor: Tri Core ARM1176 @ 625 MHz, 512 MB SDRAM, 1 GB flash, and 11.25 MB packet buffer size (6.75 MB dynamic egress + 4.5 MB ingress)
- Switching capacity: 176 Gbps
- Management: IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (RJ-45 Ethernet); SNMP Manager; Telnet; RMON1; FTP; in-line and out-of-band; out-of-band management (serial RS-232C or Micro USB.
- Includes: 1 HP 2920-48G-POE+ 740W Switch, 1 Power Supply, 1 Power Cord, and 1 Installation Manual.
Click here and here to see more information about the HP (Aruba) 2920-48 PoE Gigabit Switch 740W (J9836A).
Our SLA (Service Level Agreement) provides for the replacement of a failed switch to be shipped to the customer the next business day for all businesses located in the United States. For customers with either JumpStart or ExpertStart service, RingCentral includes the initial configuration of rental switches at no additional cost with the following considerations:
- Configuration must be completed during the Onboarding process. If additional configuration assistance is required, customers must purchase a Network Services package.
- Per standard configuration protocol, a switch can have up to two VLANs configured that are setup as Layer 2 only.
- RingCentral does not manage switches in any ongoing capacity.
Related Topics
MiCloud Supported Devices
Sky Supported Device
Opening a Support Case
MiCloud and Sky Support
Which Cloud-based Phone System are You Using?
HP 1920S-24 PoE 2SFP Gigabit Switch Rental
HP Aruba 2930F 24G PoE+ 4SFP Gigabit Switch Rental
HP Aruba 2930F 48G PoE+ 4SFP Gigabit Switch Rental
Managed Routers
Network Services Portfolio
Offnet Backup Solution
Local Area Network (LAN)
Number Porting
Trust Site
